★Three anti-glue principle:
is a method of coating a printed circuit board to form a protective film. This protective film is usually only a thin layer (about 30 to 210 & micro; m), which can be used to enhance the moisture and dirt resistance of electronic products. The ability to prevent dust and chemical pollution can also prevent solder joints and conductors from coming into contact with air and continue to corrode. It can shield and eliminate certain electromagnetic interferences, and can also act as insulation.
★RSM-CT series action flow:
| |
- Place the bin in the loading and unloading station
|
| |
- The equipment automatically feeds the sheet into the processing area.
|
| |
- After the spraying operation is completed, the sheet is automatically fed into the magazine until the cartridge is completely finished
|
| |
- Maximum 2500*1500mm products can be used for 2500*1500mm products
|
| |
- The device automatically runs after manually changing the bins in and out of the station
|
★Device Specifications:
| |
|
Maximum spray range
|
(X)350X(Y)350X(Z)100MM
|
|
Repeat accuracy
|
±0.015mm
|
|
Drive System
|
XYZ axis AC servo motor
|
|
Displacement speed
|
10~800mm/s
|
|
Control System
|
PLC Human Machine Interface Control
|
|
Machine size
|
W2570xD1323xH1870
|
|
Power
|
50-60Hz AC220V 20A
|
|
Machine weight
|
1000KGS
|
★Application industry:
Electronics/Automotive/Shipbuilding and Aerospace PCB Printed Circuit Boards, Electronic Components, IC Wafers, Discrete Components, SMD Design
